Cutting table REXEL US-1 is a modern, powerful and professional piece of equipment for roller blinds manufacturing.
Main advantages of the table:
– Depending on the needs, removable knife heads can cut fabric by ultrasonic or mechanical round knife.
– Touch screen panel provides easy and intuitive control, supporting languages: Polish, English and Russian.
– Fully automatic cutting process.
– Pneumatic clamping line provides even fabric pressure from the both sides of the table.
– Knife moving length during the cutting may be limited by the width of the material, thanks to the material sensor.
– Big illumination screen (260 mm width) is situated between the cutting line and material feed device.
– Precise length and angle measuring device is designed to regulate angles and length of the required fabric piece.
– Massive and strong table construction is made of powder coated steel profiles.
– It is possible to adjust height of the table using adjustment screws in the legs of the table.
– The table consists of the two pieces: cutting module itself and the post cutting module. There is a possibility of purchasing only cutting module and using it with the own cutting table.

Specifications:

– Total power   ~ 900 W
– Power supply    230V/50Hz
– Clamping line working pressure   4 – 5 bar
– Ultrasonic knife moving speed   0,5 m/s
– Round knife moving speed   0,6 m/s
– Round knife speed    2500 rpm
– Knife replacing time   1 – 2 minutes
– Dimensions:
– Cutting module (LxWxH)   800x3700x1200 mm
– Post cutting module (LxWxH  2700x3200x950 mm
– Box dimensions  380 x 100 x 140 m

Is designed for fast and accurate length determination of the cut profile (e.g., pipes, rail, boxes, etc.),
equipped with a manual detent. The positioners are installed on a table with equipped tabletop.
Main advantages:
– Fast and easy movement of the detent mounted on an aluminum rail.
– Ability to set the stop in any position with the lever.
– Operating length up to 6 m (optional). Price for 3m length.
– All components are protected against filings.
– Lightweight and durable construction might be placed on the table surface.
– PR-1 – an electronic display which measures using a magnetic line, the measurement accuracy of 0.1 mm.

Is designed for fast and accurate length determination of the cut profile (e.g., pipes, rail, boxes, etc.),
equipped with a manual detent. The positioners are installed on a table with equipped tabletop.
Main advantages:
– Fast and easy movement of the detent mounted on an aluminum rail
– Ability to set the stop in any position with the lever
– Operating length up to 6 m (optional). Price for 3m length.
– All components are protected against filings
– Lightweight and durable construction might be
placed on the table surface
– PR-2 – measuring length on a guide profile.

We offer the perfect device for the fabric winding during the manufacturing roller blinds, indoor
blinds. This device allows winding the fabric on the tube in much faster and more accurate way unlike to
manual winding.

Main advantages of ZT-1
– Fast and simple installation and removal of a roller blind tube with the fabric after winding;
– Fabric winding unit can be used with a cutting table for roller blinds REXEL UK-1MAX, or with any other.
– Device is foot-controlled;
– Variable speed control;
– Suitable for most roller blind tubes;
– Intuitive machine operation.

Specifications:
Wattage: 120 W
Voltage: 230 V
Tube diameter: up to 40 mm
Tube length: up to 2650 mm
Rolling machine length: 3000 mm
On client’s order we will produce Roller blind fabric winding unit ZT-1 with required specifications.

Roller blinds inspection hoist WK-1 / Roller shades control lift WK-1.

The equipment is designed for testing of roller blinds. This control lift allows checking the levelness of slats in the blinds. Checking the blinds ensures that the fabric is properly winded on the tube and to make adjustments if necessary.

– Foot-controlled
– Fast and efficient inspection of the blinds
– Adjustable design for different size blinds
– Light and stong construction.

Specifications:

Power 0,4 kW 3x380V/50Hz  (230V/50Hz optional)
Dimensions 3000x3000x500 mm
Guide maximum height 3000 mm (4000 mm optional)
Maximum width 2000 mm (3000 mm optional)
Slider’s speed approx. 0,3 m/s
Weight approx. 60 kg

Cutting table REXEL UK-1 ЕСО is designed for cutting roller blinds.

The equipment includes:
– Special cutting table with smooth tabletop.
– Pneumatic clamping line
– End-cutting knife
– Material feed device
– Measuring device.

The table has a massive steel structure that prevents any vibrations or deformations during operation. As an option it is possible to produce an illumination zone of any size. Maximum cutting length is 2.5 m. Knife operation is carried out from the remote control, lifting and lowering of the clamping line by lever. Constant blade speed is 0.5 m/s and there is no possibility of installing an ultrasonic knife at this table.

Specifications:
Cutting width: 2500 mm
Table width: 2670 mm
Table length: 2920 mm
Overall table witdh: 3280 mm
Overall table length: 3170 mm
Table height: 890 mm
Blade speed: 0,5 m/s
Knife rotation speed: 2300 rpm
Blade diameter: 108 mm
Power: 230 V
Wattage: 240 W

ATTENTION! This equipment is not available at once. It may be ordered after a thorough discussion of the customer’s needs. Time of production of the table is 7-10 days.

Maximum cutting length: 2 500 mm

The equipment includes:
– Cutting table length 3300 mm, width 2770 mm;
– End cutter knife;
– Pneumatic clamping line;
– Material feed device.

On this table you can cut:
– Fabric for the production of roller blinds;
– Different solid, thick tissues, felt;
– All kinds of textile products: carpets, rugs, runners, mats, floor coverings.

Cutting table for roller blinds consists of very rigid steel structures made of closed steel profiles. The working table top is made of laminated 25 mm chipboard. The table is protected by white powder coated aluminum edges on the perimeter. With the help of special screws you can adjust the height of the table and align the table horizontally. The cross-cutting knife attached to the working table top. The advantage of this end cutter is that through the thick material cutting is just a thin blade, not the leg of cutting knife.
Pay attention to the energy consumption of this machine: the motor that drives the circular blade is used for moving the end cutter device on the guide (1 motor performs two functions). Another advantage is the absence of idle, (process of cutting takes place in two directions). Pressing a button EMERGENCY STOP on the control box at any time you can stop end cutter e.g. to change the direction and continue cutting.
The equipment includes pneumatic clamping line, which will provide a strong and stable pinning the
cut material. You can adjust the clamping line by using the joystick. Working air pressure for the clamping
line is 3-5 atmospheres.

The equipment includes:

– Cutting table 3600 mm length, 2770 mm width.
– End-cutting knife.
– Pneumatic clamping line.
– Tabletop lighting.
– Material feed device.

On this table you can cut:

– Fabric for the production of roller blinds;
– Different solid, thick tissues, felt;
– All kinds of textile products: carpets, rugs, runners, mats, floor coverings.

Cutting table for roller blinds consists of very rigid steel structures made of closed steel profiles. The working table top is made of laminated 25 mm chipboard. The table is protected by white powder coated aluminum on the perimeter. With the help of special screws you can adjust the height of the table and align the table horizontally. The end-cutter knife is attached to the working table top. The advantage of this end-cutter is that while cutting through the thick material goes just a thin blade, not the leg of cutting knife.
Pay attention to the energy consumption of this machine: the motor that drives the circular blade is used for moving the cut-off device on the bus (1 engine performs two functions). Another advantage is the absence of idle, (process of cutting takes place in two directions). Pressing a button on the control box at any time you can stop end-cutter e.g. to change the direction and continue cutting.

The kit includes pneumatic clamping line, which will provide a strong and stable fixation of the cut material. You can adjust the clamping line by using the joystick. Working air pressure for the clamping line is 3-5 atmospheres.
ATTENTION! This equipment is not available at once. It may be ordered after a thorough discussion of the customer’s needs. Time of production of the table is 7-30 days.

REXEL Company is a leading manufacturer of blinds cutting tables in Poland. Our long experience in blinds cutting tables manufacturing allowed us to create the perfect table for blinds cutting.
REXEL UK-2 it’s the second generation cutting table, using it one can produce blinds faster and simpler! Table construction is made of closed, high quality steel profiles with powder coating which provides longstanding and protection against corrosion for a very long time. Tabletop edges protected with white powder coated aluminium angles; this solution provides impressive tabletop durability. Brand new mechanical knife construction with high speed electrical motor helps to achieve very accurate fabric cut.
Table UK-2 can cut roller blinds fabric from rolls up to 3000 mm width. Tabletop illumination zone is an additional option that helps to inspect blinds fabric before cut.

Standard widths of post cutting table after cutting line are: 3100 mm, 3400 mm, 4000 mm

ADVANTAGES & SPECIFICATIONS:

– Control panel with durable buttons;
– Tabletop illumination zone for fabric inspection;
– Improved manual positioner for 90º angle set;
– Pneumatic clamping line;
– Table is completely made of European materials;
– Energy chain for cutter cables protection;
– Two direction cutting ability;
– Round blade sharpening device;
– Cutting length: 3000 мм;
– Round blade speed: 4200 rpm;
– Head moving speed along guide: 0,9 m/s;
– Voltage: 230 V /1 phase / 50 Hz;
– Overall power: 700 W.

Key features:

– One can replace cutting head (ultrasonic or mechanical round knife) depending on fabrics type.
– Easy and user-friendly operation is achieved through touch-screen (available languages – Polish, English, French or Russian and Spanish).
– Partially automated cutting process,
– Pneumatic two side fabric clamp (in standard is supplied with rope pull switch along operator’s side of table).
– Fabric end sensor ensures faster cutting cycle – knife cart stops automatically after fabric piece is cut and returns back to start position.
– Finger sensor from the rollers side prevents fabric clamp from pressing if foreign object placed under clamp.
– Big inspection light (260 mm / 10″ width) between fabric feed rolls and cutting line
– Precise measuring angle bar (angle and bar cart backlash adjustments can be made).
– Stable construction is made of powder coated steel.
– Manual fabric feed rolls, with manual centring system. Motorized rollers are available with remote control.
– Fabric clamp foot switcher in included in set.
– Adjust levelling using adjustable table feet.

Specifications:

Cutting width:  4000 (157.4″)
Tabletop width: 4200 mm (165.3″)
Tabletop length after cut-off line: 3100/3400/4000 mm (122″/133.8″/157.4″)
Whole width: 4750 mm (187″)
Whole length: 5200 mm (204.7″)
Tabletop height: 900 mm (35.4″)
Cutting speed: Min: 0.1 m/s – Max: 0.5 m/s (0.32-1.64 ft/s)
Blade rotation speed: 2400 rpm
Blade diameter: 65 mm (2.55″)
Voltage: 230 V
Wattage: 900 W
Ultrasonic knife: V
Sharpening device: V
Mechanical round knife: V
Fabric clamp: V – PT*
Backlighting: V – S*
Variable knife cart speed: V
Variable blade rotation speed: X
Roll manual centering system: V – S*
Fabric clamp foot switcher: V – S*
Semi-automatic fabric feed system: V

*PT – Pneumatic two-side
*S – Standard

Cutting table REXEL UK-2 ЕСО is designed for roller blinds fabrics cutting. The table has a massive steel structure that prevents any vibrations or deformations during operation. Maximum cutting length is 2.5 m. Knife operation is manual, lifting and lowering of the clamp by lever. Constant blade speed is 0.5 m/s. Table is based on REXEL OT-1/R manual lay-end cutter.

Specifications:

Cutting width:     up to 3000 mm
Tabletop width:     3200 mm
Tabletop length after cut-off line:     3010 mm or longer
Whole width:     3400 mm
Whole length:     3290 mm or longer
Tabletop height:     900 mm
Cutting speed:
Blade rotation speed:     2300  rpm
Blade diameter:     108 mm
Voltage:    230 V
Wattage:    120 W
Ultrasonic knife:    –
Mechanical round knife:    Yes, manual
Fabric clamp:    Manual
Screen: No

An automatic measuring stop is designed for cutting any profiles made of aluminum.
This machine is equipped with a stop, which is automatically set to the specified position after entering the required length of the cut profile of the on the touch screen. The end of the profile should be moved all the way to the stop and a segment can be cut. This equipment provides fast and accurate positioning.

The price is for cutting stand without saw.