The End cutter OT-3/S is intended for cutting solid and heavy materials and is widely used for material cutting during manufacturing process. On your request we can develop OT-3/S for cutting of: plastic, polyester, PVC, felt, carpets, coco mats. Maximum cutting thickness is up to 2 cm, depending on the type of material. The advantage of this cutting table is that through the thick material goes just a thin blade, not the leg of cutting knife.
Pay attention to the energy consumption of this machine: the motor that drives the circular blade is used for moving the cut-off device on guide (1 motor performs two functions).
Another advantage is the absence of idle (process of cutting takes place in two directions).
Pressing a button on the control box at any time you can stop end cutter e.g. to change the direction
and continue cutting.
The kit includes pneumatic clamping line, which will provide a strong and stable pinning of the material. You can adjust the clamping line by using the joystick. Working air pressure for the clamping line is 3-5 atmospheres.
Is supplied in a wooden box that provides reliable protection the equipment during transportation.

Specifications:
Power supply: ~ 3phase/400V/50Hz
Motor power: 250W
Round knife speed: 1450 rpm
Round knife diameter: 125 mm (optional – 150 mm)
Max. cutting speed: 0,4 m/s
Max. cutting length: 2500 mm
Clamping line working pressure: 3-5 atm

The automatic end cutter OT-1/A is used in plants or wholesale outlets for cutting textile materials.
It quickly and accurately cuts a segment of fabric to the required length. Therefore, it can be installed as an
additional device for the cutting table, rewinding machine, or the textile inspection machine. On these
machines can be installed the cutting length counter and the counter of cut sections.
Working principle:
The work cycle on the end cutter OT-1/A is automatic (While cutting, the material knife moves in the
guide way independently). At client’s request, REXEL will produce an end cutter the necessary length (e.g.
for a non-standard width of cutting table).

Specifications:

Voltage   230V
Current   1,04A
Knife motor power   120W
Trolley motor power   120W
Blade diameter   108 mm
Round blade speed    2200 RPM
Trolley movement speed    0,5 m/s
Gear gable diamter   5 mm
Toothed belt type  T5/280 mm(width.9~10 mm)

The End cutter OT-3 is intended for cutting solid and heavy materials and is widely used for cutting the material during the roller blinds, indoor blinds manufacturing. The advantage of this cutting table is that through the thick material goes just a thin blade, not the leg of cutting knife.
Pay attention to the energy consumption of this machine: the motor that drives the circular blade is used for moving the cut-off device on guide (1 motor performs two functions).
Another advantage is the absence of idle (process of cutting takes place in two directions).
Pressing a button on the control box at any time you can stop end cutter e.g. to change the direction
and continue cutting.
The kit includes pneumatic clamping line, which will provide a strong and stable pinning of the material. You can adjust the clamping line by using the joystick. Working air pressure for the clamping line is 3-5 atmospheres.Is supplied in a wooden box that provides reliable protection the equipment during transportation.

Specifications:
Voltage:                                3-phase/380V
Wattage:                               250 W
Material thickness:                 up to 20 mm
Material width:                       up to 220 cm
Knife rotation speed:              1350-1450 rpm
The knife movement speed:   0.5 m / s
The diameter of the blade:     125 mm

The manual end cutter OT-1/R is the device, which is used in plants or wholesale outlets for cutting textile materials. Its task is quick and accurate cutting required length of the of fabric piece. Therefore, it can be installed as an additional device for the cutting table, rewinding machine, or the textile inspection machine. On these machines can be installed the cutting length counter and the counter of cut sections. Working principle: The work cycle on the end cutter OT-1/R is manual. At client’s request, will produce an end cutter the necessary length (e.g. for non-standard width of the cutting table).

Key features:

– Suitable for cutting plastic films, cloths made of soft thermoplastic materials or synthetic fabric.
– Convenient cutter holder with rollers under foot.
– Controlled by a button on the handle.
– The generator automatically adjusts the output power level.
– Ultrasonic cutting allows to seal fabric edge, which prevents fraying.
– The knife is ready for use immediately after the generator is turned on, one has to press a button on the handle and start cutting.
– Ultrasonic cutting is safe with no emissions of cutting fumes such as smoke or toxic fumes from textiles.
– The cutting tip does not need to be cleaned.
– Built-in ventilation prevents generator heating during continuous operation.
– The unit is very energy efficient.
– Power output indicator is on the front panel of the generator.
– Made in Italy.
– 3 year warranty for generator.

Specifications:

– Frequency: 40,000 Hz
– Power: 400 W
– Voltage: 230 V

The set consists of: rear cloth press, front cloth press rail with the cutter runner, cutter and material feeder, automatic layers counter. Cloth press rails are 260cms long in standard what enables assembling on a table 230cms maximum wide or smaller.
The device cuts precisely and presses the material. You save material and labour cost.
Voltage 230V, motor power 200W, cutting speed 12.000 rpm.

The set consists of: rear cloth press, front cloth press rail with the cutter runner, cutter and material feeder, automatic layers counter. Cloth press rails are 260cms long in standard what enables assembling on a table 230cms maximum wide or smaller.
The device cuts precisely and presses the material. You save material and labour cost.
Voltage 230V, motor power 160W, cutting speed 12.000 rpm.