Key features:

– Pneumatic press for upholstery is designed for furniture industry.
– It can be used in manufacturing of the big pieces of upholstered furniture with springs or upholstery foam.
– It greatly facilitates the production of such furniture; it provides even compression of springs or foam to the desired thickness over the entire surface.
– There is a significant time saving, because the whole operation can be done by one person, the press holds elements of the furniture in the same position in which it was placed under the press for the upholstery and provides easy access to the entire back side of the furniture piece, without the need to rotate it.
– Using pneumatic cylinder with screw system and a hand wheel allows one to accurately adjust the desired compression force. Pressing force is indicated on the operating pressure regulator, mounted on the head of the press.

Specifications:

Tabletop dimensions:    1700×800 mm
Adjustable tabletop height:    750 – 1000 mm
Pressing mound dimensionsi:    1156 х 310 mm
Working pressure:    3-9 bar
Pneumatic cylinder:    D80x350
Pressure regulator:    Yes
Cylinder height hand wheel:    Yes

Pneumatic table for mattresses is designed for furniture industry. It can be used in manufacturing of the big pieces of upholstered furniture with spring mattresses or upholstery foam. It greatly facilitates the production of such vast furniture; it provides even compression of springs or foam rubber to the desired thickness over the entire surface.
Upholstery of a cloth is carried out by pre-stretching it on a mattress, it gives a good effect – upholstery cloth has smooth surface with no visible wrinkles.
Also, there is a significant time saving, because the whole operation can be done by one person, the press continues to hold elements of the furniture in the same position in which it was placed under the press for the upholstery and provides easy access to the entire back side of the furniture piece, without the need to rotate it.

The power supply of pneumatic press is compressed air, so you can use your existing network of the compressed air in your production shop. Using pneumatic actuator with trapezoidal screw and a hand wheel allow you to accurately adjust the desired compression force to the mattress. Pressing force is indicated on the operating pressure regulator, mounted on the body of the press.

Specifications:

Tabletop dimensions: 2350 x 1500 mm
Pressing frame dimensions: 1720 x 520 mm
Table height: adjustable 550 – 850 mm
Complete width of machine: 1652 mm
Weight – ok. 225kg
Working pressure – 0-9bar
Manufacturer: Rexel
Made in Poland

Key features:

– The machine is designed for semi-automatic assembly of furniture frames with zig-zag springs and Rapid Clips.
– The machine frame is made of anodized aluminium on special swivel feet, extending base, frame pneumatic clamps and pulling mechanism.
– A transparent cover made of aluminium and plexiglass with end-switchers that prevent machine start when cover is opened.
– The machine is equipped with bi-manual start system that controls extending base with pulling pneumatic cylinders.

Specifications:

Wooden frame size: 1375 x 760 mm (54.1″ x 29.9″)
Overall dimensions (WxDxH): 1571 mm x 1163 mm x 1105 mm (61.85″x45.78″x43.5″)
Pneumatics’ country of origin: Italy
Frame: aluminum profiles (anodized)
The machine can be made in custom size on demand for a specific size of the sofa frame and zig-zag springs.

Using this press you can significantly improve efficiency, productivity and quality of your chair manufacturing department.

Long stroke of the pneumatic cylinder and lower telescopic stand allow adjusting press on necessary, comfortable height for the operator.
Our press is perfect machine for upholstering of office chair seats or backrests. The control device with two-hand sensor ensures the machine’s total safety. It is possible to adjust the pressing force using air pressure regulator.

The press provides controllable and even pressing of the chair seats and backrests (fabric, upholstery foam, chipboard), so there is no need to pull the material to ensure its right tension.
Press is equipped with turntable cushion that makes upholstery nice and easy. It allows worker to turn and staple a seat or a backrest along a contour. Equipment is manufactured in Poland.

Increase your productivity by several times!
Specifications:

Occupied surface of the basis: 60×60 cm
Height: 90 cm
Weight: 35 kg
Working pressure: 3-6 bar.

Using this press you can significantly improve efficiency, productivity and quality of your chair manufacturing department.

Long stroke of the pneumatic cylinder and lower telescopic stand allow adjusting press on necessary, comfortable height for the operator.
Our press is perfect machine for upholstering of office chair seats or backrests. The control device with two-hand sensor ensures the machine’s total safety. It is possible to adjust the pressing force using air pressure regulator.

The press provides controllable and even pressing of the chair seats and backrests (fabric, upholstery foam, chipboard), so there is no need to pull up the material to ensure its right tension.
Press is equipped with turntable cushion that makes upholstery nice and easy. It allows worker to turn and staple a seat or a backrest along a contour. Equipment is manufactured in Poland

Increase your productivity by several times!

Specifications:

Occupied surface of the basis: 80×105 cm
Height: 215 cm
Weight: 110 kg
Working pressure: 3-6 bar

Key features:

– More universal machine for different sizes of frames.
– Can work for different frames up to 2000×790 mm (78.7”x 31.1”).
– Machine is designed for semi-automatic assembly of furniture frames with zig-zag springs and Rapid Clips.
– Machine frame is made of steel frame on special swivel feet, extending base, frame pneumatic clamps and pulling mechanism.
– Transparent cover made of aluminium and Plexiglas with end-switchers that prevent machine start when the cover is opened.
– Machine is equipped with bi-manual start system that controls extending base with pulling pneumatic cylinders.

Specifications:

Overall dimensions (WxDxH): 2482x1210x1152 mm (97.7″x47.6″45.3″)
Pneumatics country of origin: Italy
Frame: steel
Machine can be custom made or adjusted for particular sofa frame and zig-zag springs.

PDM-1 can be used in manufacturing big pieces of upholstered furniture with springs or upholstery foam. 

Key features:

– Pneumatic press for upholstery designed for increased efficiency in furniture industry.
– Facilitates the production of furniture; it provides even compression of springs or foam to the desired thickness over the entire surface.
– Time-saving device; it can be operated by one person. The press holds the elements of the furniture in the same position in which it was placed under the press for the upholstery and provides an easy access to the entire back side of the furniture piece, without moving it.
– Using pneumatic cylinder with a screw system and a hand wheel allows one to accurately adjust the desired compression force. Pressing force is indicated on the operating pressure regulator, mounted on the head of the press.

Specifications:

Model:    PDM-1/HD
Tabletop dimensions:    2350 x 1500 mm (92.51″ x 59″)
Adjustable tabletop height:    550 – 850 mm (21.6″ – 33.46″)
Upper mound dimensions:    1720 x 520 mm (67.71″ x 20.47″)
Working pressure:    3-9 bar (43.5 – 130.5 PSI)
Pneumatic cylinder:    D100x350
Pressure regulator:    Yes
Cylinder height adjustability:    Yes