The End cutter OT-3 is intended for cutting solid and heavy materials and is widely used for cutting the material during the roller blinds, indoor blinds manufacturing. The advantage of this cutting table is that through the thick material goes just a thin blade, not the leg of cutting knife.
Pay attention to the energy consumption of this machine: the motor that drives the circular blade is used for moving the cut-off device on guide (1 motor performs two functions).
Another advantage is the absence of idle (process of cutting takes place in two directions).
Pressing a button on the control box at any time you can stop end cutter e.g. to change the direction
and continue cutting.
The kit includes pneumatic clamping line, which will provide a strong and stable pinning of the material. You can adjust the clamping line by using the joystick. Working air pressure for the clamping line is 3-5 atmospheres.Is supplied in a wooden box that provides reliable protection the equipment during transportation.

Specifications:
Voltage:                                3-phase/380V
Wattage:                               250 W
Material thickness:                 up to 20 mm
Material width:                       up to 220 cm
Knife rotation speed:              1350-1450 rpm
The knife movement speed:   0.5 m / s
The diameter of the blade:     125 mm